Installation

LIGHTING: HEIGHT CONTROL SENSOR:

INSTALLATION

1. INSTALL HEIGHT CONTROL SENSOR






(a) 2WD:
(1) Install the height control sensor with the 2 bolts.






(b) 4WD:
(1) Install the height control sensor with the 2 bolts.






(c) Install the height control sensor link with the nut.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(d) Connect the connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. PERFORM INITIALIZATION Repair Instruction - Initialization

4. VEHICLE PREPARATION FOR HEADLIGHT AIM Adjustments

5. PREPARATION FOR HEADLIGHT AIM (Using a tester) Adjustments

6. PREPARATION FOR HEADLIGHT AIM (Using a screen) Adjustments

7. HEADLIGHT AIMING INSPECTION Adjustments

8. HEADLIGHT AIMING ADJUSTMENT Adjustments