Installation

AIR CONDITIONING: BLOWER UNIT:

INSTALLATION

1. INSTALL BLOWER ASSEMBLY

(a) Install the blower assembly with the claw.
(b) Install the bolt and 2 screws.
BOLT - Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)

(d) Install the clamp and connect the connectors.
2. INSTALL WIRING AIR INDICATOR HARNESS NO.2 SUB-ASSEMBLY
3. INSTALL AIR DUCT NO.2

(a) Install the air duct No.2 with the screw.
Torque: 2.5 Nm (25 kgf-cm, 22 in-lbf)
4. INSTALL HYBRID VEHICLE CONTROL ECU Installation

5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

6. INSTALL INSTRUMENT PANEL UNDER COVER NO.2 SUB-ASSEMBLY Installation

7. INSTALL COWL SIDE TRIM RH SUB-ASSEMBLY
8. INSTALL FRONT DOOR SCUFF PLATE RH
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal. Repair Instruction - Initialization