Installation

1. Install seat into vehicle.





A. Temporarily install seat with the 4 bolts.

NOTICE

Be careful not to damage vehicle body or interior components.

B. Tighten the bolts in the sequence shown.

Torque: 37 N-m (377 kgf-cm, 27 ft-lbf)

C. Connect the connector.

D. Connect the battery terminal.

NOTE
Some Systems must be initialized after the battery is disconnected, please refer to the repair manual within E-TAS / TIS library:

- Division: Lexus
- Model: LX570
- Year: 2008, 2009
- Service Category: General
- Section: Introduction
- Keyword: Repair Instruction: Initialization





E. Install seat hinge cover.





F. Install the seat hinge cushion cover.

2. Cycle rear seat to confirm proper operation is restored.