Voice Recognition Difficulty

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Voice Recognition Difficulty

Voice Recognition Difficulty

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CONDITION
(a) Check if the voice recognition level of the system is low by using only one particular voice.
OK:
Voice recognition level of the system is low with any voice.
NG -- VOICE RECOGNITION LEVEL OF SYSTEM VARIES DEPENDING ON VOICE AND PRONUNCIATION. THIS IS NOT A MALFUNCTION.
OK -- Continue to next step.
2. CHECK MICROPHONE (NAVIGATION CHECK MODE)





(a) Enter the "Mic&Voice Recognition Check" mode Operation Check.
(b) When a voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
(c) Push the recording switch and perform voice recording.
HINT:
The recording limit is 5 seconds.
(d) Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
OK:
All check results are normal.
NG -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK -- END