Removal

BRAKE: BRAKE PEDAL:

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH
2. REMOVE FRONT FLOOR FOOT REST
3. REMOVE COWL SIDE TRIM BOARD LH
4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT Removal

5. REMOVE INSTRUMENT PANEL FINISH PLATE Removal

6. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL RH Removal

7. REMOVE INSTRUMENT PANEL LOWER LH Removal

8. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
9. REMOVE BRAKE PEDAL PAD
10. REMOVE PUSH ROD PIN
(a) Remove the clip and push rod pin from the brake pedal lever.
11. REMOVE BRAKE PEDAL SUPPORT REINFORCEMENT
(a) Disconnect the stop light switch connector from the stop light switch assembly.






(b) Remove the bolt from the brake pedal support reinforcement.






(c) Remove the bolt and nut, then remove the brake pedal support reinforcement from brake pedal support sub-assembly.
12. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY






(a) Remove the 4 nuts and brake pedal support sub-assembly.
13. REMOVE BRAKE PEDAL RETURN SPRING
14. REMOVE STOP LIGHT SWITCH ASSEMBLY
(a) Turn the stop light switch assembly counterclockwise and remove the stop light switch assembly.
(b) Remove the cushion from brake pedal support sub-assembly.
15. REMOVE BRAKE PEDAL SUB-ASSEMBLY






(a) Remove the bolt and nut, then remove the brake pedal sub-assembly from brake pedal support sub-assembly.
(b) Remove the 4 brake pedal bushes from the brake pedal and brake pedal lever.
(c) Remove the 2 collars from brake pedal sub-assembly and brake pedal lever.