Active On-Demand Coupling Oil Pump

Active On-Demand Coupling Oil Pump
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal

WARNING: Make sure to support the vehicle with axle stands.
1 Raise the vehicle on the lift.
2 Remove the drive pinion flange.
For additional information, refer to Drive Pinion Flange Service and Repair









CAUTION: Be prepared to collect escaping oil.

CAUTION: Make sure that the area around the component is clean and free of foreign material.
Discard the O-ring seals.

Installation

CAUTION: Only use the specified material to lubricate the seals.
1 Lubricate the O-ring seals.
For additional information, refer to Specifications Rear Drive Axle/Differential
2 Install the new O-ring seals.

CAUTION: Make sure that the area around the component is clean and free of foreign material.
3 Install the oil pump.
Torque to: 6 Nm
4 Connect the electrical connector.
5 Install the drive flange.
For additional information, refer to Drive Pinion Flange Service and Repair
6 Check and top-up the active on-demand coupling fluid level.
For additional information, refer to Active On-Demand Coupling Filling Active On-Demand Coupling Filling