Rear Suspension
Rear Stabilizer BarService Repair No - 64.35.08
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. CAUTION: Make sure that the ball joint ball does not rotate.
CAUTION: Discard the nuts.
Disconnect both rear stabilizer bar links from the stabilizer bar.
Torque:
60 Nm
3. Remove the stabilizer bar bushings.
4. CAUTION: Note the fitted position of the component prior to removal.
Remove the stabilizer bar.
Installation
1. To install, reverse the removal procedure.