Engine Lower Support Insulator
Engine Lower Support InsulatorService Repair No - 12.45.17
Removal
NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Remove the engine undershield.
3. CAUTION: Make sure that these components are installed to the noted removal position.
Remove the lower support insulator.
Torque:
110 Nm
Vehicles with petrol engine
4. NOTE: Do not disassemble further if the component is removed for access only.
Remove the heat shield.
Torque:
10 Nm
All vehicles
5. Remove the engine mount link brackets.
Torque:
110 Nm
Installation
1. To install, reverse the removal procedure.