Brake Fluid Reservoir
Brake Fluid ReservoirRemoval
CAUTION: Extreme cleanliness must be exercised when handling these components.
CAUTION: If brake fluid is spilt on the paintwork, the affected area must be immediately washed down with cold water.
NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
Left-hand drive vehicles
2. Remove the battery.
Right-hand drive vehicles
3. Remove the plenum chamber panel.
All vehicles
4. CAUTION: Be prepared to collect escaping fluids.
Torque:
6 Nm
Vehicles with manual transmission
5. CAUTION: Be prepared to collect escaping fluids.
CAUTION: Make sure that all openings are sealed.
All vehicles
6. CAUTION: Make sure that all openings are sealed.
Installation
All vehicles
1. To install, reverse the removal procedure.
2. Bleed the brake system.
Vehicles with manual transmission
3. Bleed the clutch system.