Brake Caliper Anchor Plate, Rear

Brake Caliper Anchor Plate

Service Repair No - 70.55.29

Removal

1. WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.
2. Remove the wheel and tire.

3.





4.





5.





6. CAUTION: Do not allow the brake caliper to hang on the brake hose.

Tie the brake caliper housing aside.
7.





8.





Installation

1. WARNING: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled.

Clean the brake caliper housing and anchor plate using brake cleaning fluid.

2. Clean and lubricate the guide pins.
3. Install the guide pins.

4. CAUTION: Make sure that new bolts are installed.

Install the brake caliper anchor plate.
Torque:
110 Nm

5. CAUTION: Make sure that new bolts are installed.

Install the brake caliper housing and install the top bolt.
Torque:
35 Nm

6. Install the clips and brake pads.

7. CAUTION: Make sure that new bolts are installed.

CAUTION: Make sure that the brake hose is not twisted and is correctly located.

Align the brake caliper to the anchor plate.
Torque:
30 Nm

8. Install the wheel and tire.