Brake Caliper Anchor Plate, Front

Brake Caliper Anchor Plate

Service Repair No - 70.55.28

Removal

1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.
2. Remove the front wheel and tire.

3.





4. Torque:
28 Nm





5. CAUTION: Do not allow the brake caliper to hang on the brake hose.

Release the brake caliper.

6.





7. CAUTION: Make sure that new bolts are installed.

Torque:
200 Nm





Installation

1. CAUTION: Make sure that the brake hose is not twisted and is correctly located.

To install, reverse the removal procedure.