Front Suspension

Front Stabilizer Bar Link

Service Repair No - 60.10.02/60.10.04

Removal

WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

1. Raise the front of the vehicle.
2. Remove the wheel and tire.
3. Release the stabilizer bar link.
^ Remove the nut.





CAUTION: Note the fitted position of the special washer.

4. Remove the stabilizer bar link.
^ Remove the nut.
^ Collect the washer.





Installation
1. Install the stabilizer bar link.
^ Install the special washer.
^ Tighten the nuts to 100 Nm (74 ft. lbs.).

2. Install the wheel and tire.
^ Tighten the wheel nuts to 140 Nm (103 ft. lbs.).