Spoiler: Service and Repair

Rear Spoiler

Removal

1. Remove the liftgate upper trim panel.
2. Remove the 3 bolts securing the rear spoiler to tailgate.







3. Disconnect the electrical connector.
4. If equipped disconnect the electrical connector from the parking aid camera.
5. Remove the rear spoiler.
^ Carefully release the clips.
^ Release the electrical harness.







6. NOTE: Do not disassemble further if the component is removed for access only.

Remove the high mounted stoplamp.
^ Remove the 4 screws.
^ Remove the wiring harness.







7. Remove the parking aid camera.
^ Remove the screw.
^ Carefully release the 2 clips.

8. If equipped remove the parking aid camera bracket.
^ Drill out the rivet.
^ Remove the adhesive pad.







Installation

1. If equipped install the parking aid camera.
^ Install the rivet.
^ Install the adhesive pad.

2. If equipped install the parking aid camera.
^ Install the clips.
^ Install the screws.

3. Install the high mounted stoplamp.
^ Secure the wiring harness.
^ Install the screws.

4. Install the rear spoiler to the tailgate.
^ Tighten the bolts to 10 Nm (7 ft. lbs.).

5. Connect the electrical connector.
6. If equipped connect the electrical connector to the parking aid camera.
7. Install the liftgate upper trim panel.