Differential Rear Bushing

Differential Rear Bushing

Service Repair No - 51.15.44


























Removal

1. WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.

2. Remove both rear wheels and tires.
3. Remove the rear differential.
4. Take note of the fitted position of the rear bushings. The RH bushing slot is positioned vertically and the LH bushing slot is positioned horizontally.





5. CAUTION: Note the fitted position of the component prior to removal.

Using the special tool, remove the bushing.
Special Service Tools: Remover, Differential Bushing
Special Service Tools: Remover/Installer, Differential Bushing
Special Service Tools: Hydraulic Cylinder 10t





Installation

1. CAUTION: Only use the specified special tool.

Using the special tool, compress the bushing.
Special Service Tools: Installer, Differential Bushing
Special Service Tools: Installer, Differential Bushing
Special Service Tools: Hydraulic Cylinder 10t





2. CAUTION: Make sure the correct special tool is used to install the bushings to the correct depth.

NOTE: Make sure that these components are installed to the noted removal position.

Using the special tool, install the bushing, making sure the slot on the RH bushing is positioned vertically and the slot on the LH bushing is positioned horizontally.
Special Service Tools: Hydraulic Cylinder 10t
Special Service Tools: Installer, Differential Bushing
Special Service Tools: Installer, Differential Bushing
Special Service Tools: Installer, Differential Bushing





3. Install the rear differential.
4. Install the rear wheels and tires.