Rear Brake Disc

Brake Disc

Service Repair No - 70.12.13

Removal

NOTE: If the parking brake shoes or the brake discs have been removed for access to other components then DO NOT carry out the bedding in procedure.

1. WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.

2. Remove the wheels and tires.

3. CAUTION: Make sure that no load is placed on the brake hose.

Tie the brake caliper and anchor aside.

4. Release the park brake shoe adjustment.

6. Repeat the above procedure for the other side.

Installation

1. CAUTION: Make sure that the mating faces are clean and free of foreign material.

Install the brake disc.
Torque:
35 Nm

2. CAUTION: Make sure that the mating faces are clean and free of foreign material.

CAUTION: Make sure that the brake hose is not twisted and is correctly located.

Secure the brake caliper and anchor plate to the wheel knuckle.
Torque:
110 Nm

3. Repeat the above procedure for the other side.
4. Adjust the parking brake.
5. Install the wheels and tires.
6. If necessary, carry out the parking brake shoe bedding-in procedure.