D-Pillar Trim Panel

D-Pillar Trim Panel

Service Repair No - 76.13.73

Removal

1. Remove the spare wheel cover.







2. Remove the loadspace scuff plate.







3. Release the liftgate seal.







4. Remove the loadspace stowage tray.







5. Remove the loadspace securing ring.







6. Release the rear quarter trim panel.







7. Remove the D-pillar trim panel.







8. NOTE: Do not disassemble further if the component is removed for access only.

Remove the speaker.







Installation

1. Install the speaker
2. Install the D-pillar trim panel.
3. Secure the rear quarter trim panel.
4. Install the loadspace securing ring and tighten the Torx screw.

Torque: 25 Nm

5. Install the loadspace stowage tray.
6. Attach the liftgate seal.
7. Install the loadspace scuff plate.
8. Install the spare wheel cover.