Instrument Panel Console

Instrument Panel Console

Service Repair No - 76.25.03

Removal

1. Remove the pen tray and cubby box mats.







2. Remove the instrument panel center speaker grille.







3. CAUTION: Protect the surrounding trim from damage when changing the component.

Release the instrument panel console.







4. Disconnect the instrument panel console switch pack electrical connector.







5. Remove the instrument panel console.

6. NOTE: Do not disassemble further if the component is removed for access only.

Remove the instrument panel console switch pack.







Installation

1. Install the instrument panel console switch assembly and tighten the Torx screws to 3 Nm (2.2 ft. lbs.).
2. Connect the console switches electrical connector.
3. Install the instrument panel console with the Torx screws.
4. Install the instrument panel center speaker grille.
5. Install the pen tray and cubby box mats.