Front Seat

Front Seat

Service Repair No - 78.10.44.99

Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed.

WARNING: The headrests must never be forcibly removed from the front seats. To remove the headrests, the seat must first be removed from the vehicle and then disassembled to access clips and multiplugs.

Remove

1. Raise seat cushion.







2. Remove bolt securing seat belt to front seat.
3. Remove nut caps and remove 2 nuts securing front of seat.
4. Move the seat forward.
5. Make the SRS system safe.

WARNING: Always disconnect both battery leads before beginning work on the SRS system. Disconnect the negative lead first. Never reverse connect the battery.







6. Release seat harness multiplug from bracket, release and disconnect main harness multiplug.
7. Remove 2 bolts securing rear of seat.
8. Fit protection to sill.
9. With assistance, carefully remove seat.

Refit

1. Fit front seat.
2. Fit nuts and bolts securing seat and tighten to 45 Nm (33 lbf.ft).
3. Fit caps to nuts.
4. Fit seat belt to seat and tighten bolt to 48 Nm (35 lbf.ft).
5. Connect battery leads, earth lead last.
6. Reposition seat.