Steering Column Cover: Service and Repair

Nacelle - Column
Remove
1. Remove key from starter switch.





2. Carefully remove upper half of nacelle. Take care when releasing clips from lower half of nacelle.
3. Remove 2 screws securing lower nacelle to steering column.
4. Lower steering column tilt lever.
5. Carefully remove cover from starter switch being careful not to damage the passive coil.
6. Carefully pull lower half of nacelle from retaining clip on column lock

Refit
1. Ensure that the steering column tilt lever is lowered.
2. Position lower half of nacelle and engage with clip on column lock.
3. Raise column tilt lever.
4. Fit and tighten 2 screws securing lower half of nacelle to steering column.
5. Fit cover to starter switch.
6. Fit upper half of nacelle and ensure that clips engage with lower half.