Evaporative Emission Control Canister: Service and Repair

Charcoal Canister - NAS

Service Repair No - 17.15.13

Remove
1. Disconnect battery earth lead.
2. Remove RH rear wheel arch liner.







3. Release and disconnect pipes from charcoal canister and DMTL.


CAUTION: Before disconnecting or removing components, ensure the immediate area around joint faces and connections are clean. Plug open connections to prevent contamination.







4. Remove 2 bolts securing canister support bracket and release assembly from mounting.
5. Disconnect multiplug from DMTL and remove canister and valve assembly.







6. Release clip and disconnect hose from charcoal canister.


CAUTION: Before disconnecting or removing components, ensure the immediate area around joint faces and connections are clean. Plug open connections to prevent contamination.


7. Remove nut and bolt securing charcoal canister and remove canister from bracket.

Refit
1. Fit charcoal canister to bracket and tighten nut and bolt to 4 Nm (3 ft. lbs.).
2. Connect hose and secure with clip.
3. Position canister assembly and connect multiplug.
4. Fit canister assembly to mounting and tighten bolts to 4 Nm (3 ft. lbs.).
5. Connect pipes to DMTL and canister.
6. Fit wheel arch liner.
7. Connect battery earth lead.