Power Steering Fluid Cooler: Service and Repair

Oil Cooler - KV6 Models
Remove
1. Remove front bumper.
2. Position container below PAS pipes to catch fluid spillage.
3. Release and disconnect PAS hoses from oil cooler.
4. Remove 2 bolts and remove PAS fluid cooler.

Refit
1. Fit fluid cooler and tighten bolts to 10 Nm (7.5 ft. lbs.).
2. Clean connections.
3. Connect hoses to fluid cooler.
4. Fit front bumper.
5. Bleed PAS system.