Lateral Stabilizer Rod: Service and Repair

Lateral Stabilizer Rod

REMOVAL

Panhard Rod:

1. Remove fasteners (1) at mounting arm.
2. Remove fasteners (2) at axle bracket.
3. Remove Panhard rod (3).
4. Press out flexible bushings (4).
- Ensure the steel tubing locates on the outer edge of the bushings and not on the rubber inner.

INSTALLATION
1. Install replacement bushings.

NOTE: Apply pressure to outer edge of bushings, and not rubber inner.

2. Reverse removal procedure steps 1 to 4.
3. Tighten fasteners to 88 Nm.