Steering Wheel: Service and Repair

Remove
1. Remove driver's airbag module.
2. Position steering wheel so the road wheels are in the straight ahead position.

Steering Wheel Retaining Nut:

3. Disconnect cruise control switch connector (where fined) from rotary coupler harness.
4. Release harnesses from clip on steering wheel.
5. Remove steering wheel nut.
6. Release steering wheel from column.
7. Feed harnesses through hole in steering wheel.
8. Remove steering wheel.


CAUTION: Prevent rotation of rotary coupler once steering wheel is removed Secure in position with adhesive tape.


Refit
9. Reverse removal procedure.


CAUTION: Ensure road wheels are straight ahead before fitting steering wheel.


10. Fit steering wheel ensuring the rotary coupler lugs are correctly engaged.
11. Fit steering wheel nut. Tighten to 50 Nm.
12. Refit driver's airbag module.