Center Link: Adjustments
Drag Link1. Ensure front wheels are aligned and in straight ahead position. Alignment
2. Adjust drag link 924 mm between ball joint centers.
3. Connect drag link.
- Tighten to 40 Nm.
4. Lower vehicle to ground level and remove chocks.
5. Road test vehicle. Road Test Procedure
NOTE: If steering wheel is not in straight ahead position when vehicle is travelling in a straight line, drag link length is incorrect and is pushing drop arm away from central position.
6. Drag link adjustments:
- Right hand drive vehicles:
- If steering wheel is to right, drag link is too long.
- If steering wheel is to left drag link is too short.
- Left hand drive vehicles:
- If steering wheel is to right, drag link is too short.
- If steering wheel is to left drag link is too long.
7. Adjust drag link until steering wheel points straight ahead when vehicle is travelling in a straight line.