Alpine Light Duct

Alpine Light Duct

Remove
1. Remove evaporator to alpine light duct.
2. Remove rear door upper trim panel.





3. Remove clip securing alpine light duct to body flange.
4. Remove screw securing alpine light duct.
5. Manoeuvre alpine light duct from headlining and 'D' post finishers and remove duct.

Refit
6. Position alpine duct and manoeuvre into position.
7. Fit and tighten screw securing alpine duct to body.
8. Fit clip securing alpine duct to body flange.
9. Fit rear door upper trim panel.
10. Fit evaporator to alpine light duct.