Parking Brake Cable: Adjustments

1. Select a gear or P in main gearbox.
2. Chock road wheels.
3. Release parkbrake lever.
4. Remove switch panel from center console.
5. Ensure parking brake shoes are correctly adjusted.
6. Rotate adjustment thumbwheel below parkbrake lever until parking brake is fully operational on third notch of ratchet.

NOTE: Cable adjustment must be used ONLY for initial adjustment and to compensate for cable stretch.

7. Operate parking brake to settle shoes. Recheck that park brake is fully operational on third notch of ratchet. Readjust if necessary.
8. Install console switch panel.