Parking Brake Lever: Service and Repair

NOTE: Numbers in parentheses ( ) below refer to numbers in illustrations.

REMOVAL
1. Raise vehicle on four post lift.
2. Disconnect battery negative lead.
3. Remove centre console.
4. Disconnect two connectors from parking brake warning switch.
5. Raise lift.
6. Pull brake cable through grommet in base of lever (4).





7. Remove two bolts securing lever (9). Remove lever.
8. Remove grommet from lever.
9. Remove two screws securing warning switch. Remove switch.

INSTALLATION
1. Reverse removal procedure.
2. Adjust parking brake. Adjustments