Air Cleaner Housing: Service and Repair
AIR CLEANERRemove
1. Loosen clip securing intake hose to MAF sensor and disconnect hose.
2. Disconnect multiplug from IAT sensor.
3. Release 2 toggle clips and release MAF sensor from air cleaner.
4. Remove "O" ring and carefully place sensor aside.
5. Remove 3 nuts securing air cleaner to mounting rubbers.
6. Remove air cleaner assembly.
Note: Do not carry out further dismantling if component is removed for access only.
7. Remove IAT sensor.
Refit
8. Clean threads of IAT sensor and fit sensor to air cleaner.
9. Position air cleaner to mountings and fit and tighten nuts.
10. Clean MAF sensor and mating face.
11. Fit NEW "O" ring, fit sensor and secure toggle clips.
12. Connect multiplug to IAT sensor.
13. Connect air intake hose and tighten clip.