P1363

DTC P1362
No ignition coil activation, coil 2, cylinders 5-8 (Driving Cycle A)

Possible causes by suggested order of priority:
- Fuse F26.
- Connectors C635, C630.
- Circuit integrity F26 (WG) - C630/5 (WG).
- Circuit integrity C635/15 (WY) - C630/2 (WY).
- Ignition coil.
- ECM.

Fuse F26.
- Check for fuse not correctly inserted, fuse blown, fuse connections loose, damaged or corroded.
- Certain diagnostics may also perform further checks to try and narrow down the fault. Eg Check if other circuits fed by the same fuse are also experiencing problems

Connectors C635, C630.
- Check for connector not correctly latched, backed out pins, damaged pins, corroded pins

Circuit integrity F26 (WG) - C630/5 (WG).
- Check for open circuit, short circuit to ground, supply or other circuit, damaged or unlatched connector, intermediate connectors or headers

Circuit integrity C635/15 (WY) - C630/2 (WY).
- Check for open circuit, short circuit to ground, supply or other circuit, damaged or unlatched connector, intermediate connectors or headers

Ignition coil.
- No detail available for this fault

ECM.
- No detail available for this fault