Wiper Arms - Windscreen

Wiper Arms - Windscreen

Service Repair No - 85.15.01

Remove





1. Hold back small spring clip which retains wiper arm on shaft boss using suitable tool.
2. Gently pry off wiper arm from shaft boss.

Refit
3. Allow wiper motor to move to 'park' position.
4. Push arm onto splined boss, locating it so that wiper blades are clear of windscreen rail.
5. Ensure the spring retaining clip is located in the retaining groove on the shaft boss.
6. Push end cap over securing nut.
7. Operate wiper on a wet windscreen to ensure blades do not over travel.