Power Steering Bleeding: Service and Repair

Power Steering System Filling and Bleeding

1. Check that fluid level is at maximum level.
2. Run engine to normal operating temperature.
3. Recheck reservoir, top up if necessary.

NOTE: Maintain maximum fluid level in reservoir. Do not increase engine speed or move steering wheel.





4. With engine at idle speed, slacken bleed screw. When fluid seeps past bleed screw retighten screw.
5. Check fluid level.
6. Clean away fluid around bleed screw.
7. Check hose connections, pump and steering gear for fluid leaks by holding steering on full lock in both directions.

CAUTION: Do not maintain this pressure for more than 30 seconds in any one minute to avoid overheating fluid and possibly damaging seals.

8. Carry out road test.
11. Check and top-up fluid level.