Operation With High Coolant Temperature
OPERATIONIt should be noted that under high coolant temperatures, when the engine is switched off, the condenser fans will be activated and will run for approximately ten minutes.
When the Ignition Switch (X134) is in position II, battery voltage is applied to the Ignition Load Relay (K127). The relay is energized, applying battery voltage to the Condenser Fan Relay (K109) and the Fan Control Module (Z118). If the coolant temperature exceeds 100°C (212°F), the Condenser Fan Coolant Temperature Switch (X113) closes and energizes the Condenser Fan Relay (K109) by applying ground to the relay's coil. When the relay is energized, voltage from fuse F3 is applied to the Condenser Fan Motors (M113, M121) through the relay's contacts.