Front

REMOVE
1. Remove front road wheels.
2. Clean exterior of calipers.

Front Brake Caliper & Pads:

3. Remove split [cotter] pin from retaining pins.
4. Remove pad retaining pins and anti-rattle springs.
5. Remove brake pads.
6. Clean exposed parts of pistons, using new brake fluid. Wipe away excess with a lint free cloth.

Retracting Caliper Piston:

7. Using piston clamp LRT-70-500 or equivalent, press each piston back into its bore. Ensure that displaced brake fluid does not overflow from reservoir.


REFIT
1. Fit brake pads.
2. Fit pad retaining pins and anti-rattle springs. Secure with new split [cotter] pin.
3. Apply service brake pedal several times to locate pads.
4. Check fluid reservoir. Top up if necessary, using correct grade of fluid.