Harmonic Balancer - Crankshaft Pulley: Service and Repair

Crankshaft Pulley Assembly

1. Remove viscous coupling.

2. Remove drive belt. Service and Repair

3. Raise vehicle on ramp ( hoist ).

4. Remove bell housing bottom cover.

5. Remove engine undertray.

6. With assistance to stop flywheel rotation, remove crankshaft pulley assembly retaining bolt.

7. Remove crankshaft pulley assembly.

8. If required: Place assembly in vice and remove pulley

9. Fit pulley to torsional vibration damper.

10.Lubricate seal face os assembly.

11.Fit pulley assembly.

12. With assistance to stop flywheel rotation, fit retaining bolt. Tighten to 280 Nm.

13. Reverse removal procedure. Steps 1 - 5.