Intake Manifold: Specifications

Intake manifold retaining bolts, tighten in sequence from the middle bolts towards the outside in a crisscross pattern 12 Nm (105 in. lbs.)





CAUTION: The throttle body mounting bolts MUST be torqued to specifications. DO NOT OVER TIGHTEN MOUNTING BOLTS. Over tightening can cause damage to the throttle body, throttle plate, gaskets, bolts and/or the intake manifold. Proper torque of the mounting bolts is critical to normal operation.

Throttle body mounting bolts 5.6 Nm (50 in. lbs.)