Cylinder Head Torque & Sequence

NOTE: The cylinder head bolts are tightened using an torque angle procedure.

Tighten the bolts in sequence using the following steps and torque values:
- Step 1: Tighten bolts 1-8, 27 Nm (20 ft. lbs.).
- Step 2: Verify that bolts 1-8, all reached 27 Nm (20 ft. lbs.), by repeating step 1 without loosening the bolts. Tighten bolts 9 thru 12 to 14 Nm (10 ft. lbs.).
- Step 3: Tighten bolts 1-8, 90 degrees.
- Step 4: Tighten bolts 1-8, 90 degrees, again. Tighten bolts 9-12, 26 Nm (19 ft. lbs.)