Fog/Driving Lamp Relay: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the cover for the Power Distribution Center (PDC).
3. Remove the fog lamp relay by grasping it firmly and pulling it straight out from the receptacle in the PDC.

INSTALLATION
1. Position the fog lamp relay to the proper receptacle in the Power Distribution Center (PDC).
2. Align the fog lamp relay terminals with the terminal cavities in the PDC.
3. Press firmly and evenly on the top of the fog lamp relay until the terminals are fully seated in the PDC.
4. Reconnect the battery negative cable.