Dome Lamp Bulb: Service and Repair

REMOVAL
1. Disconnect the negative battery cable.
2. Insert a small flat blade between the dome lamp housing and dome lamp lens. Carefully pry the lamp lens from the lamp housing
3. Remove the dome lamp from the lamp terminals by pulling the lamp straight out.

INSTALLATION
1. Install the dome lamp into the lamp terminals by pushing the lamp straight into the terminals.

NOTE: The dome lamp lens is equipped with a locating tab that must be inserted into the slot in the dome lamp housing.

2. Align the dome lamp lens locating tab with the slot in the dome lamp housing and press the lens into place.
3. Reconnect the negative battery cable.