SKREEM/SKIM Stock Overflow Failure
SKREEM/SKIM-STOCK OVERFLOW FAILUREWHEN MONITORED
With the ignition on.
SET CONDITION
The micro-controller has exceeded its stack space limit.
POSSIBLE CAUSES
- SKREEM/SKIM internal DTC failure
DIAGNOSTIC TEST
1. VERIFY THAT THE DTC IS ACTIVE
NOTE: This trouble code indicates an internal module fault.
Turn the ignition on.
With the scan tool, record and erase the SKREEM/SKIM DTCs.
Perform 5 ignition key cycles, leaving the ignition key on for a minimum of 90 seconds per cycle.
With the scan tool, read the SKREEM/SKIM DTCs.
Q: Did this DTC reset?
YES: Replace and program the SKREEM/SKIM.
Perform SKIS VERIFICATION TEST. Verification Tests
NO: Test complete, the conditions that set this DTC are not present at this time.