Hi-Beam Indicator Lamp: Testing and Inspection

Headlamp High Beam Indicator Lamp

The diagnosis found here addresses an inoperative headlamp high beam indicator lamp condition.

If the problem being diagnosed is related to inoperative headlamp high beams, refer to headlamps for diagnosis.

If no headlamp system problems are found, the following procedure will help locate an open in the high beam indicator lamp circuit.

1. Disconnect the battery negative cable.
Remove the instrument cluster bezel and the cluster assembly.
Unplug the cluster printed circuit connector.
2. Connect the battery negative cable.
Turn the headlamps on and select the high beams with the multi-function switch stalk.
Check for battery voltage at the high beam indicator driver circuit cavity of the printed circuit connector.
If OK, replace the faulty bulb.
If not OK, repair the open circuit to the head-lamp dimmer (multi-function) switch as required.