Right Hand Drive (RHD) Vehicle
Removal And InstallationBuzzer Module
1. Disconnect the battery negative cable.
2. Locate the buzzer module in a connector near the fuseblock module, under the driver's end of the instrument panel.
3. Unplug the buzzer module by pulling it straight back from its connector cavities.
4. To install the buzzer module, align its terminals with the cavities in the connector.
Then, push the module firmly into place.
5. Connect the battery negative cable.
6. Test the buzzer module operation.
Chime/Buzzer Warning System Switches
Service procedures for the various switches used in the chime/buzzer warning system can be found in the appropriate section:
- Driver's door jamb switch
- Ignition key-in switch
- Headlamp switch
- Driver's seat belt switch