Idle Speed/Throttle Actuator - Electronic: Service and Repair

NOTE: The Idle Air Control (IAC) motor is mounted to the throttle body adjacent to the [1][2]throttle position sensor.

IAC Motor - Removal/Installation:

REMOVAL
1. Disconnect the electrical connector from the IAC motor.

2. Remove IAC motor torx head mounting screws.

3. Remove IAC motor.


INSTALLATION
1. Install IAC motor into throttle body and tighten retaining screws, torquing them to 60 in-lbs (7 Nm).

2. Connect electrical connector to IAC motor.