D. Glow Plug Relay Cover Installation Procedure

1. Locate the two adjoining relays mounted on the left (driver's side) inner front fender, over the wheelhouse.

Note:
Do not remove the relays or connectors. The cover is to be installed with all current components in place.

2. Slide the supplied rubber cover over the relays and connectors.

^ The cutout side of the cover should be outboard, flush against the fender surface and completely covering the connectors.

^ Top of cover should be flush with top of relays.

3. Insert the supplied tie strap between cover and fender, and between the clips. Work the tie strap through until it extends out from the harness. Secure cover with tie strap and trim off excess strap.