Choke Assembly - Model 2150

1. Install the choke lever and shaft and the shaft bushing in the choke housing.

2. Install the coil lever and lever attaching screw.

3. Install the choke housing and gasket on the carburetor.

4. Connect the choke rod, fast idle cam rod and vacuum diaphragm rod to the choke lever and shaft (Fig. 4).

5. Install the choke cover and coil, cover retainer, and gasket. Secure the cover with replacement screws but do not tighten the screws completely at this time.

6. Align the index marks on the choke cover and housing (Fig. 4) and tighten the cover retaining screws securely.

7. Connect the choke heater wire.

PARTS

Not affected.


S.R.T. INFORMATION

Not affected.