Front Door Window Motor: Service and Repair

Front Door Window Regulator Motor

Removal
1 Raise the window glass.
2 Remove the cover and disconnect the battery ground cable. For additional information, refer to Specifications [1][2]Battery
3 Remove the front door trim panel. For additional information, refer to Front Door Trim Panel Service and Repair




4 Remove the window regulator motor.
- Disconnect the electrical connector.
- Remove the 3 Torx screws.

Installation
1 Install the window regulator motor.
- Install and tighten the Torx screws.
- Connect the electrical connector.
2 Install the front door trim panel. For additional information, refer to Front Door Trim Panel Service and Repair
3 Connect the battery ground cable and install the cover. For additional information, refer to Specifications [1][2]Battery