Navigation System - Incorrectly Shows Metric Units
NUMBER: XK419-001MODEL: 2007 XK
DATE: April 06, 2006
SECTION: 419-07
MPH Reset for Navigation Screen
AFFECTED VEHICLE RANGE:
New XK VIN: B00001 onwards
Model Year: 2007 onwards
CONDITION SUMMARY:
PROCEDURE TO RESET NAVIGATION SYSTEM UNITS
This bulletin has been issued to inform dealers of a potential Navigation Screen display error. Some vehicle Navigation Screens may display metric units, when the instrument cluster displays English units. A Navigation System software error may be the cause. An incorrect unit display can occur following a battery reset or software download. The software error can be corrected through the touch screen.
NOTE:
A post-launch software update will correct this error.
Situation:
Navigation System software error results in incorrect units of measure display.
Action:
Should a vehicle Navigation Screen display metric units, while the instrument cluster displays English units, refer to the Repair Procedure detailed in this bulletin to manually reset the navigation system software to compute and display English units.
PARTS:
No parts required. Information purposes only.
WARRANTY:
NOTE:
The manual Navigation System resetting procedure is covered in the PDI so this manual navigation system resetting procedure can only be claimed for a battery reset or software download after completing the vehicle PDI.
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE
MANUALLY RESET NAVIGATION SYSTEM SOFTWARE TO COMPUTE AND DISPLAY ENGLISH UNITS
1. From the Navigation System home screen, select Vehicle'.
2. Select 'Trip Comp'.
3. Select 'Units'.
4. Select and hold 'KM' for 15 seconds.
5. Select 'Miles'.
6. Return to Navigation screen and confirm changes.
Disclaimer