Glove Compartment: Service and Repair

Glove Compartment

Removal





1 Remove the instrument panel end trim panel.
- Release the 3 clips.




2
CAUTION: Removal of the clips is a delicate procedure, damage will occur if any force is used.
Remove the passenger side footwell trim panel.
- Remove the 3 clips.




3 Release the glove compartment.
- Remove the 5 Torx screws.
- Release the 2 clips.




4 Remove the glove compartment.
- Disconnect the 2 electrical connectors.
- Release the glove compartment lamp assembly.

Installation
1 Install the glove compartment.
- Install the lamp assembly.
- Connect and secure the electrical connectors.
- Tighten the Torx screws.
2 Install the passenger side footwell trim panel.
- Carefully secure the clips.
3 Install the instrument panel end trim panel.
- Release the door aperture seal.
- Carefully secure the clips.
- Install the aperture seal.