Fan Shroud: Service and Repair

Cooling Fan Motor and Shroud (26.25.25)

Removal
All Vehicles
1. Remove fuse 38 from the engine compartment fuse box prior to performing any under hood service in the area of the cooling fan.
2. Drain the cooling system.
3. Lower the vehicle.
4. Remove the coolant expansion tank.

Vehicles with 2.5L or 3.0L engine
1. Remove the air cleaner.

Vehicles with 4.2L engine
1. Remove the air cleaner.

All Vehicles





1. Remove the radiator mounting brackets.





2. Detach the upper coolant hose.





3. Disconnect the cooling module electrical connectors.

Vehicles with 4.2L engine





1. Detach the thermostat housing hose.





2. Disconnect the auxiliary water pump electrical connector.





3. Detach the auxiliary water pump.

All Vehicles





1. Disconnect the dual coolant flow valve electrical connector.





2. Detach the dual coolant flow valve.

Vehicles with supercharger





1. Disconnect the water pump electrical connector.

All vehicles





1. NOTE: Right-hand shown left-hand similar.

Remove the cooling fan motor and shroud retaining bolt.





2. CAUTION: Make sure that the retaining lugs of the radiator are not damaged when detaching the cooling fan motor and shroud.

NOTE: Left-hand shown right-hand similar.

Detach the cooling fan motor and shroud from the retaining lugs of the radiator.





3. CAUTION: Make sure that the radiator is not damaged when removing the cooling fan motor and shroud.

Remove the cooling fan motor and shroud.

Installation





1. CAUTION: Make sure that the radiator is not damaged when installing the cooling fan motor and shroud.

CAUTION: Make sure that the retaining lugs of the radiator are not damaged when installing the cooling fan motor and shroud.

To install, reverse the removal procedure.





2. Tighten to 10 Nm.





3. Tighten to 10 Nm.





4. Tighten to 10 Nm.
5. Tighten to 6 Nm.
6. Fill the cooling system.