Parking Brake Pad: Service and Repair

Parking Brake Pads Vehicles With: Brembo Brakes

Removal
1. Carry out the parking brake cable tension release.
2. Remove both rear wheels and tires.




3. Detach the parking brake cable.
1. Reposition the parking brake caliper lever.
2. Detach the parking brake cable.





4. Remove the parking brake pads.
1. Remove the parking brake pad retaining pins.
2. Remove the parking brake pad anti-rattle spring plate.
3. Remove the parking brake pads.





5. Remove the parking brake caliper.
^ Remove and discard the parking brake caliper retaining bolts.

Installation

1. CAUTION: Make sure the brake disc faces are clean before installation.

^ CAUTION: Brake pads must always be replaced in axle sets.

^ CAUTION: Install new parking brake caliper retaining bolts.

NOTE: Using a suitable tool, fully retract the parking brake caliper pistons.

To install, reverse the removal procedure.





2. Tighten to 70 Nm.