Fuel Tank Over-Pressure Pipe

- Open the luggage compartment.
- Remove spare wheel / wheel cover and jack.
- Remove the floor carpet.
- Remove the boot front and side liner.
- Remove fuel tank upper insulation mat.
- Remove over-pressure pipe from evaporative flange by pushing back collar on quick-fit connector in flange port, and pulling pipe from connector.
- Displace over pressure pipe from body grommet.
- Fit new over pressure pipe through body grommet.
- Connect over pressure pipe to evaporative loss flange quick-fit connector.

CAUTION: Pipes and component stubs must be fully inserted into connector ends to ensure proper fit; failure to do so could cause fuel leakage.

- Refit fuel tank upper insulation mat.
- Refit boot side liners and floor carpet.
- Refit jack and spare wheel / wheel cover.
- Close luggage compartment.